Update
Updating database... Please wait.
Monday 27 November 2017 at 03:06
remove balls , its tricky lowering the head though , make sure the upper motorcycle is raised a bit , or it can break when lowering the head , wrap in moving blankets. ive had 3 of these and i did transport one on its side with no issues.
Source: http://pinside.com/pinball/forum/topic/would-you-transport-a-banzai-run-sideways-400-miles#post-4093380
Monday 27 November 2017 at 03:05
You get an A+ on your homework!
good news. Z11-Z15 are fine.
And, I think that U4 is fine too.
Post a pic of connector J6 on the MPU (lower edge, left). Has someone used a Jamma connector there that may have slid? Is there any evidence that J6 has been repinned?
--
Chris Hibler - CARGPB #31
http://w...
Source: http://pinside.com/pinball/forum/topic/black-hole-startup-issues#post-4093379
Monday 27 November 2017 at 03:05
Hope his is the right forum? Newbie here on the site and looking for the best feed for tech help.
Ive got a Williams 1987 F14 game, bought it 2 yrs ago and it all worked.
Last time we turned it on the entire set of gas displays are blank? All gas tubes
I reset all cables and headers to no avail.
The...
Source: http://pinside.com/pinball/forum/topic/newbie-here-f14-display-out-pwrsupply-goodwhat-else#post-4093378
Monday 27 November 2017 at 03:05
i did all those and results are as you have listed
Source: http://pinside.com/pinball/forum/topic/f14-upper-diverter-locked-on#post-4093377
Monday 27 November 2017 at 03:02
Magic sound board has 32 pins - Altek board may have 34 pins. Just leave the last 2 pins open. (pins 33 and 34).
Source: http://pinside.com/pinball/forum/topic/stern-magic-1#post-4093375
Monday 27 November 2017 at 03:02
Honestly you should just hire NAVL and leave the head up, along with the other recommendations for moving a pin.
You are asking for trouble otherwise.
Source: http://pinside.com/pinball/forum/topic/would-you-transport-a-banzai-run-sideways-400-miles#post-4093374
Monday 27 November 2017 at 03:01
i did purple on the lower half of the playfield, and red on the upper half
Source: http://pinside.com/pinball/forum/topic/medieval-madness-titan-rubber-colors#post-4093373
Monday 27 November 2017 at 02:58
Quoted from 0geist0:Isn't Texas and Florida always lower on prices?
Well, no state income tax, fuel is typically lower here, and overall cost of living is lower compared to other places. However, pinball has really taken off and I see people asking premiums (and I assume getting them) for most mac...
Source: http://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin/page/139#post-4093372
Monday 27 November 2017 at 02:57
Brought home a GTB Genie, yesterday. Bought in the Los Angeles area for $700. Playfield is in excellent condition, but the BG is another story. The ball won't kick out, and the score displays are wonky, but I'm happy with the purchase.
20171126_165243 (resized).jpg20171125_231833 (resized).jpg20171...
Source: http://pinside.com/pinball/forum/topic/what-machine-did-you-bring-home-today-post-your-pictures/page/143#post-4093371