pinside

Update

Updating database... Please wait.

Ive on "Let's get STONED! The Rolling Stones Club!!!!"

Wednesday 7 March 2018 at 19:33

Where can I pick up a spare Mick plastic ? I'm struggling to find one with usual suppliers

I have the reinforced Mick on a Stick but would like to have a spare.

Source: http://pinside.com/pinball/forum/topic/lets-get-stoned-the-rolling-stones-club/page/4#post-4267945

mmr61184 on "Replacement For Williams 5647-12133-13 Mircoswitch (Whirlwind)"

Wednesday 7 March 2018 at 19:33

Quoted from jhanley:You can also just install the arm and other parts on a new switch.I've done it . How do you do that, the arm looks like its attached internally. The black cherry switches you can just pop the arm off i didn't think you can do it with these.

Source: http://pinside.com/pinball/forum/topic/replacement-for-williams-5647-12133-13-mircoswitch-whirlwind#post-4267944

Lermods on "Where can I draw 12v on a Stern SM 2007 the 12v in the cab is funky"

Wednesday 7 March 2018 at 19:32

What are you trying to connect? Do what Ryan said, use your meter and test the voltage. Game off, See if you have continuity between the ground and 12v, if you do, it’s shorted.

Source: http://pinside.com/pinball/forum/topic/where-can-i-draw-12v-on-a-stern-sm-2007-the-12v-in-the-cab-is-funky#post-4267943

TripAct93 on "Outhole sequence issue 1974 williams"

Wednesday 7 March 2018 at 19:31

I've allready done that. Now i'm back to the outhole sequence only hapening once per drain, but the ball count doesn not step down due to the ball index relay not being pulled

Source: http://pinside.com/pinball/forum/topic/outhole-sequence-issue-1974-williams#post-4267942

Quench on "Stern 6 Digit Display Problem"

Wednesday 7 March 2018 at 19:31

1) If you slowly turn up the display voltage on the Solenoid Driver board (towards 190V), does that digit then start working? 2) The schematic picture you posted above shows four pins connected to the A5 digit. Unsolder them one at a time leaving the unsoldered pin floating in the centre of the hole...

Source: http://pinside.com/pinball/forum/topic/stern-6-digit-display-problem#post-4267941

BOBCADE on "Luci signed translite by Steve Ritchie"

Wednesday 7 March 2018 at 19:31

I'll take it

Source: http://pinside.com/pinball/forum/topic/luci-signed-translite-by-steve-ritchie#post-4267940

flynnibus on "Stern of the Union Address"

Wednesday 7 March 2018 at 19:31

Quoted from fattdirk:This might be the stupidest thing I've read here on awhile. Stern already has a track record of having slow and incomplete code releases and you think they should invest the resources in making your utility menu look pretty? A menu that works perfectly fine and is known by every...

Source: http://pinside.com/pinball/forum/topic/stern-of-the-union-address/page/11#post-4267939

o-din on "Refrigerators"

Wednesday 7 March 2018 at 19:31

Get one of these and you can start the next ice age in the freezer. DSCN2640__03768.1510863035.500.659 (resized).jpg

Source: http://pinside.com/pinball/forum/topic/refrigerators#post-4267938

rolf_martin_062 on "Gottlieb Target Alpha game reset issues"

Wednesday 7 March 2018 at 19:30

Hi FatPanda I read Your post-62 --- 1. The original problem, 2. Subsequently ... if not then back to #1: (((Well, to end the start-up of a new game: The pin NEEDS to have all Score-Drums stepped forward to have reached position-zero.))) 3. and 4. and 5. When that happens I turn-off the power - then ...

Source: http://pinside.com/pinball/forum/topic/gottlieb-target-alpha-game-reset-issues/page/2#post-4267937

TheLaw on "Refrigerators"

Wednesday 7 March 2018 at 19:29

Quoted from xsvtoys: I just keep refilling them and dumping them into the holding tray. That's a great route as long as you can actually open the ice maker tray

Source: http://pinside.com/pinball/forum/topic/refrigerators#post-4267936