pinside

Update

Updating database... Please wait.

cfh on "Picking the right coils"

Friday 12 January 2018 at 13:24

Just look at one of the other pop bumpers for the coil number. Almost for sure it's a 26-1200 coil (11 ohms). Also check the pop bumper switch cap. If this shorts (common on this system), you can get errant coil firing. But most likely the driver board TIP transistor decided it was time to die, and ...

Source: http://pinside.com/pinball/forum/topic/picking-the-right-coils#post-4171962

hoby1 on "CGC Pinball Production Update"

Friday 12 January 2018 at 13:23

Just called the distributer that I bought my AFM from. ( Automated Services ) Talked to April and she started a list to get these sent out when they arrive. Quess who's the first one on it.......

Source: http://pinside.com/pinball/forum/topic/cgc-pinball-production-update/page/28#post-4171961

joe2012 on "Vintage STEREO Club (Monster Receivers, Cassette, CD Players, Turntables, R2R)"

Friday 12 January 2018 at 13:23

I'm a JBL fan too. Fisher RS-2010 into 4311b and L-50's.

Source: http://pinside.com/pinball/forum/topic/vintage-stereo-club-monster-receivers-cassette-cd-players/page/3#post-4171960

wayner on "EM : Show us your EM Pinball Machines!"

Friday 12 January 2018 at 13:21

New Year family time is a time for my Grandsons to sharpen their EM skills!

gsons118 (resized).jpg

Source: http://pinside.com/pinball/forum/topic/em-show-us-your-em-pinball-machines/page/204#post-4171959

cfh on "BlackKnight left kicker not working"

Friday 12 January 2018 at 13:21

Quoted from Kaveman:Thank you so much for the advice. I shorted the corresponding transistor tab to ground and nothing happened. Did the same with the working kicker coil and it triggered the working coil. This suggests the transistor may be faulty. But when I tested continuity of the faulty transis...

Source: http://pinside.com/pinball/forum/topic/blackknight-left-kicker-not-working#post-4171958

rooftop on "Reproduction Aprons"

Friday 12 January 2018 at 13:16

im in for a fire power, thanks

Source: http://pinside.com/pinball/forum/topic/reproduction-bally-aprons/page/9#post-4171957

cfh on "Ground wire modification. A Todd TNT fix. Where can I find the pins?"

Friday 12 January 2018 at 13:12

On the sys80b power supply, do not spray the 5 volt adjustment pot. REPLACE the damn thing! it's like 50 cents (500 ohm pot). He's on the right track (in that this pot is failure prone), but it needs replacement, not sprayed with some chemical.

Source: http://pinside.com/pinball/forum/topic/ground-wire-modification-a-todd-tnt-fix-where-can-i-find-the-pins#post-4171956

Hdmike444 on "Ghostbusters mod"

Friday 12 January 2018 at 13:08

$60 shipped

Source: http://pinside.com/pinball/forum/topic/ghostbusters-green-dmd-and-mods#post-4171955

Hdmike444 on "Gandalf on shadowfax with lit up staff"

Friday 12 January 2018 at 13:07

Looking to sell what I have made up, I don’t plan on making these once my supply runs out. Have a couple staffs left and one Gandalf

Source: http://pinside.com/pinball/forum/topic/gandalf-on-shadowfax-with-lit-up-staff/page/2#post-4171954

NeilMcRae on "Batman 66 - Official Club Thread"

Friday 12 January 2018 at 13:04

Quoted from docquest:Use hangar wire if don't want the coptper move at all when you nudge the game. Use the thinner lock wire from Harbor Freight if you want the copter to bounce around a little during gameplay. I used something similar to the harbour freight stuff and its cool when the ball hits th...

Source: http://pinside.com/pinball/forum/topic/batman-66-official-club-thread/page/160#post-4171953