Update
Updating database... Please wait.
Saturday 6 January 2018 at 21:13
Quoted from o-din:I suppose if I was an operator and new games I had invested quite a bit of money in were not giving a reasonable return and kept breaking down and the problems required waiting on new boards or whatever, I'd be a little disillusioned myself.
Maybe that's the case, but it doesn't se...
Source: http://pinside.com/pinball/forum/topic/who-is-not-planning-on-buying-any-new-games-in-2018/page/3#post-4161760
Saturday 6 January 2018 at 21:13
Buy a non working one! After about 2 weeks of working on it your wife might say "I'm going light 30 one hundred dollar bills on fire!"
Source: http://pinside.com/pinball/forum/topic/new-guy-needs-buying-advise-on-what-pins-to-start-with#post-4161759
Saturday 6 January 2018 at 21:12
Quoted from schudel5:Any EM.
Quoted from rotordave:There’s a lot to be said for games like this, where a whole 4 player game can take less time than one ball on Metallica ...
Source: http://pinside.com/pinball/forum/topic/good-short-game-pin#post-4161758
Saturday 6 January 2018 at 21:12
Ok, so I was finally able to get into the test mode. My switch is tricky as I have to wiggle it around to make contact. Didn't come up with many issues with the test, Center Target, which I figured the switch was bad as I had moved some around to be sure. Also it appears the Flipper Relay (S) is...
Source: http://pinside.com/pinball/forum/topic/mulitple-issues-on-street-fighter-2#post-4161756
Saturday 6 January 2018 at 21:12
Quoted from whthrs166:Define A Lot. (a lot to us and a lot to them can be on different ends of the spectrum) They are not selling well right now. There are a lot of unknowns at this point. I think these guys have a plan to produce multiple models from this year on...
Have you heard something new r...
Source: http://pinside.com/pinball/forum/topic/next-remake-has-to-be-cactus-canyon/page/10#post-4161757
Saturday 6 January 2018 at 21:12
Quoted from cody_chunn:Did your game have the metal plate under the front end?
Only close-ups I had were of the back end. Had a new rear panel done made of plywood. It may look confusing in the first pics.
218ADBAC-244A-4B88-9C1F-F3CAFB6125CA (resized).jpeg
Source: http://pinside.com/pinball/forum/topic/78-bally-cabinet-bottom-panel-repair#post-4161754
Saturday 6 January 2018 at 21:12
After much debate, I went with a color similar to Kvan99's idea. Transparent Copper. I'll post pics when the pieces are finished. I want to thank everyone for the help. This was a difficult decision.
8953 (resized).jpeg
Source: http://pinside.com/pinball/forum/topic/lotr-powder-coating-tomorrow-color-suggestions/page/2#post-4161753
Saturday 6 January 2018 at 21:12
Quoted from MightyGrave:ah ok made the connection-test with a male-D9 and a gender changer. So i have to buy a straight DB-9 cable....
Or you can cross the signals with 3 wires (DB9-pins 2->3, 3->2 and 5->5)
Quoted from MightyGrave:For the serial connection from TLL Converter to MPU I us...
Source: http://pinside.com/pinball/forum/topic/acdc-display-and-modify-dot-matrix-images/page/52#post-4161752
Saturday 6 January 2018 at 21:11
I wrote this a few days ago when I spent a few hours on Xmas day doing an install. https://pinside.com/pinball/forum/topic/adding-shaker-motor-to-twd
Source: http://pinside.com/pinball/forum/topic/walking-dead-le-shaker-motor-not-working-twdle#post-4161750