Update
Updating database... Please wait.
Friday 3 November 2017 at 12:37
Well, I must not be a fan of gold colored powder coat because I don’t like it on the MMRLE, WWWLE, or so far on this.
Source: http://pinside.com/pinball/forum/topic/guardians-of-the-galaxy-is-here/page/29#post-4054800
Friday 3 November 2017 at 12:34
Hi,
The problem is not the programmer but the EPROM chip itself. May be too old.
Erasing the EPROM set all bit to 1 (ie, all bytes should be FF) and programming set only bits to 0.
Here, you try to program a 3A (00111010) value, but the verify (read) after programming return the value 7A (01111010)....
Source: http://pinside.com/pinball/forum/topic/tl866-cs-universal-programmer-unknown-error-programming-2716#post-4054799
Friday 3 November 2017 at 12:33
Quoted from dudah:ermite damage to the playfield seems minimal
Yes but is the OP absolutely SURE that there are no living termites left in it?? Termites = no good for your home
Source: http://pinside.com/pinball/forum/topic/for-sale-star-wars-20#post-4054798
Friday 3 November 2017 at 12:33
Quoted from Time:Can we get some high res photos (if not before at least during DPO) of under the playfield?
I'll see if I can snap a few...
Source: http://pinside.com/pinball/forum/topic/the-big-lebowski-preorder-club/page/129#post-4054797
Friday 3 November 2017 at 12:30
Quoted from crujones4life:It is a real bitch to do...but just replace the switch. I would have surely lost my mind by now trying to fix it. Just replace it and be done with it.
What type is it, and should it be replaced with the same one, or is there a better later design?
Source: http://pinside.com/pinball/forum/topic/partyzone-1/page/5#post-4054796
Friday 3 November 2017 at 12:24
Quoted from Darscot:The "Bic Pen Screwdriver" works surprisingly well. Google it and I'm sure you will find lots of info about Nintendo.
the bic pen trick works well for the two (3.8mm and 4.5mm) flower shaped or "game bit" screws, but not for the tri-wing screws
here are links for the "better" game...
Source: http://pinside.com/pinball/forum/topic/nes-classic-edition-unobtainium/page/33#post-4054795
Friday 3 November 2017 at 12:20
Most likely a broken wire connection. These are daisy chained so a break will cause all of them to go out, but if the break isn't at the pops it could be upstream from there. Perhaps a Jokerz owner can follow the wiring back for you, if needed.
Source: http://pinside.com/pinball/forum/topic/1988-jokerz-machine-all-3-jet-bumper-lights-out#post-4054794
Friday 3 November 2017 at 12:15
Quoted from pcprogrammer:Looks similar for sure. In this photo the WWE looks more "shiny" and the GOTG looks a little more dull. We haven't got any really high res pics yet of GOTG so the armor could be identical.
@gexchange posted some links to high res pics on dropbox earlier in the thread. The a...
Source: http://pinside.com/pinball/forum/topic/guardians-of-the-galaxy-is-here/page/29#post-4054793
Friday 3 November 2017 at 12:13
One other question. When I bought my restoration Black Knight it came with an extra partially populated playfield. The playlfield and plastics are in decent shape, some wear but no planking. I am not an expert but it looks like it could be candidate for a full resotoration. Is there a market for...
Source: http://pinside.com/pinball/forum/topic/black-knight-clubmembers-only/page/17#post-4054792
Friday 3 November 2017 at 12:07
Quoted from ksmmspt:Well that was fast!
Gotta keep the fam happy!
Source: http://pinside.com/pinball/forum/topic/for-sale-baywatch-12#post-4054791