Update
Updating database... Please wait.
Friday 20 April 2018 at 01:06
6M$M came out just after the TV show had been canceled. I was a big fan of both the show and pinball, and when I saw the pin I thought "Why'd they make this? That show is gone." Maybe it lived on in reruns in some markets but not where I lived.
Source: http://pinside.com/pinball/forum/topic/pins-that-have-been-produced-with-themes-way-too-late#post-4349967
Friday 20 April 2018 at 01:04
Quoted from vid1900:They moved the power switch to conform to the new UL regulations.
All high voltages are now confined only to the backbox, making testing and UL certification much safer/faster.
That quote is for Veneer Plywood, a VERY different product.
-
Pinball playfields are made of a ply cal...
Source: http://pinside.com/pinball/forum/topic/steve-ritchie-discusses-pinball-playfield-dimpling/page/10#post-4349964
Friday 20 April 2018 at 01:02
Playfield angle and EOS switch play a *huge* part in hitting the top lock. I switched to WPC mechs as well, which was an improvement, but was still only hitting the lock about 25% of the time. Coil wiring is fine and EOS switch is new. Flippers feel strong.
My playfield angle was 6.1 degrees, I beli...
Source: http://pinside.com/pinball/forum/topic/the-firepower-club/page/42#post-4349963
Friday 20 April 2018 at 01:02
My new method is to spray a good coat, wait about 3-5 mins, then just start piling on coats carefully watching the coat for imperfections to spray into and waiting about 5 mins between cans to let it harden up some. I totally ripped off someone's post here earlier about spraying 2 cans back to back...
Source: http://pinside.com/pinball/forum/topic/the-spraymax-2k-auto-clear-in-a-can-club/page/12#post-4349962
Friday 20 April 2018 at 01:02
Quoted from FatPanda:Or just get a new one for $55 from barakandl
https://nvram.weebly.com/new-pcbs.html
Here here!! He also put heat sinks with fins on the front I believe... much easier to deal with and more air flow to cool the diode bridges.
Source: http://pinside.com/pinball/forum/topic/bally-as-2518-club/page/19#post-4349961
Friday 20 April 2018 at 01:01
Hi pbm3
we must keep apart: Everybody would like to see an good copy of Toledo in ipdb --- You are troubleshooting on an specific problem. In post-3 I showed the link to the partial schematics (I at the time have put together from pinside-snippets --- don't get fooled - here https://pinside.com/pinb...
Source: http://pinside.com/pinball/forum/topic/toledo-will-not-reset-bonus-unit#post-4349960
Friday 20 April 2018 at 01:01
Next problem......
Any reason why the 5X light flashes constantly?
Source: http://pinside.com/pinball/forum/topic/cyclone-clubmembers-only/page/12#post-4349959
Friday 20 April 2018 at 00:59
Quoted from flynnibus:The point of punishment is not to just have a 'ok, scratch that result' - but to inflict consequences BEYOND that one incident. That's why 'he's a good player' really isn't relevant.. his punishment includes barring future results too.
His results weren't just thrown out as i...
Source: http://pinside.com/pinball/forum/topic/billy-mitchell-stripped-of-donkey-kong-record/page/4#post-4349958