Update
Updating database... Please wait.
Sunday 8 April 2018 at 02:28
People with machines that have dimples say it's normal. People with machines that don't have dimples say it's not.
I almost saw a dimple on my original Williams playfields and I almost saw one on one of my CPR's.
Source: http://pinside.com/pinball/forum/topic/steve-ritchie-discusses-pinball-playfield-dimpling/page/2#post-4326641
Sunday 8 April 2018 at 02:26
2D77FE5D-CB14-4BBE-A885-201B76726179 (resized).jpeg
Source: http://pinside.com/pinball/forum/topic/dmd-issue-wpc-95#post-4326640
Sunday 8 April 2018 at 02:26
Quoted from Jjsmooth:So now we are measuring depth of dimple... we are going to need more accurate methods for measurement and documentation.
Or maybe we don't.
You don't have to measure. Just eyeballing there is an OBVIOUS difference in frequency of deep dimples in the Stern playfields of the last...
Source: http://pinside.com/pinball/forum/topic/steve-ritchie-discusses-pinball-playfield-dimpling/page/2#post-4326639
Sunday 8 April 2018 at 02:26
Quoted from Russell:I would never want to take anyone out of context. Joe does mention that a version of a whitewood was made, to evaluate "form and fit", but it was not "built, wired and played." I wonder if it had been "built, wired and played", if perhaps the tightness of some of those shots coul...
Source: http://pinside.com/pinball/forum/topic/either-i-can%e2%80%99t-shoot-or-houdini-is-poorly-designed/page/4#post-4326638
Sunday 8 April 2018 at 02:25
Nice! Mixing that colour went really well... I dig your thinking behind the process.
I assume that will not be glossy clearcoat finish?
Source: http://pinside.com/pinball/forum/topic/king-pin-restoration-slo-mo/page/4#post-4326637
Sunday 8 April 2018 at 02:25
While it's been a few days since last posting, I finally got around to cleaning the tunnel, and was it dirty! Used Zep citrus degreaser-really good stuff. Wasn't happy with the finish after cleaning, so I applied a light coat of wax and now nice and shiny. All assembled and ready to install. But bef...
Source: http://pinside.com/pinball/forum/topic/time-zone-playfield-restoration#post-4326636
Sunday 8 April 2018 at 02:24
Hi All,
I recently picked up a Genie and its a pretty good shape cosmetically but a little fuzzy with how it's working. The game was not turning on except for a few backglass lights and the shoot again light between the flippers and was not playing. All of the sudden I tried turning it on and it al...
Source: http://pinside.com/pinball/forum/topic/little-help-with-my-genie#post-4326635
Sunday 8 April 2018 at 02:23
So now we are measuring depth of dimple... we are going to need more accurate methods for measurement and documentation.
Or maybe we don't.
Source: http://pinside.com/pinball/forum/topic/steve-ritchie-discusses-pinball-playfield-dimpling/page/2#post-4326634
Sunday 8 April 2018 at 02:23
Just listed a ‘fresh off route’ twilight zone... $4975 obo
[pinsidead=62614]
Source: http://pinside.com/pinball/forum/topic/chicago-traderseller-club/page/117#post-4326633
Sunday 8 April 2018 at 02:20
I believe it could be a CPU issue. I replaced my a good CPU board from my NBAFB to my AFM. DMD is working fine now. However, it shows “incorrect G10 for this game.” Now should I replace the whole CPU board? Not sure what to do next.
Source: http://pinside.com/pinball/forum/topic/dmd-issue-wpc-95#post-4326632